Exterior Sconces

Without a doubt, sconces are among the most commonly used options of outdoor lighting Australia wide. When it comes to choosing sconces outdoor lighting Australia stores offer a vast range including modern, contemporary, vintage or traditional designs. Some of these wall-mounted lights are electric, while some of are solar-powered. If you decide to opt for solar ones, keep in mind that they need to be installed in a location that gets a lot of sun on a daily basis, otherwise, they won’t work properly.

Types of Outdoor Sconces

Flush Mount Lights

Flush mount lights are mounted flush to the wall and not on an arm that protrudes from it. Unlike in the past, nowadays, you can choose from a large selection of exterior flush mount sconce lights that are available in many styles.

Semi Flush Mount Lights

Unlike the case with flush mount, these are not directly attached to the wall. Instead, they are attached to an arm that connects to a plate which is installed on an exterior wall. Barn lights are the most popular ones that belong to this category.

Wall Lanterns

Almost all types of wall lanterns are considered semi flush mount sconces as they are attached to an arm that’s attached to a plate. And it’s the plate that’s installed to the exterior wall. Just like the other types, wall lanterns are also available in different styles, and they are mainly used as accent lights rather than for security purposes.

Landscape Lights

Landscape lights are usually used for illuminating the green and floral areas of the exterior. Except for emphasizing things, these lights are great for preventing crime as they provide lots of illumination.

If you consider yourself skilled for the job, installing them is really easy. First you need to line them 2.5 – 3 metres apart while making sure there is no grass (you can get rid of it with a shovel) in the installation area. Once done, create a trench of about 7.5cm, insert the low-voltage electrical cable and bury it. Next, connect the cable to an outdoor electrical outlet and prepare the holes for the fixture’s stake with a screwdriver and insert the lights into the metal ground stake.

Although it’s not that difficult, if you don’t have any experience with working with electricity, it’s better to contact a professional electrician for the installation process.

Motion Sensor Lights

As the name implies, these lights have a motion sensor which consists of small electronic pieces that can detect infrared waves that radiate when things move. And since humans, animals and cars radiate a considerable amount of heat, when detected, these lights turn on automatically. Motion sensor lights can be installed in any outdoor area you want and they come in various different models. For their installation, it’s better to call a professional as they need to be installed in a specific way as to prevent fooling the detector.

Floodlights

Floodlights provide wide-reaching lighting that can cover large areas. The best thing about these lights is that they can illuminate hidden nooks that are quite difficult to see.

For their installation you’ll need to find a high point and locate the power source. Then you need to create a hole and fit the light and the electrical cable through it. After that, you can connect it to a power source and run a few tests to see whether the installation process was successful or not.

Spotlights

Spotlights offer direct and focused light on specific areas which is why they are mainly used as accent lighting for landscaping. For instance, they are used in doorway areas, to illuminate signage, fixtures or some other details. Unlike floodlights which spread the light across a wide area, spotlights focus their beams in narrow lines which are directed towards a specific thing (key areas like trees, signs, statues, waterways or pools).

For their installation first you will have to locate the GFCI outlet and place the power pack nearby. The next step is to select the spotlight area and then determine the trench line before digging for the cable. Once done, it’s time to assemble the spotlight, dig a hole for the stake and drive the light in. When done, connect the spotlight to the power source and connect the power rack to the outlet. Simple as that.

The post Types of Outdoor Lights & Ways to Install Them appeared first on Ways To.

Just like with accessories in fashion, you can use layers of light to add interest to your interior. Creating eye-catching areas with lights is not as hard as it may sound, especially if you opt for quality home Led lighting solutions, such as downlights, strips or batten-shaped fixtures that can solve the aesthetic problems of your low-ceiling or dull-looking rooms.

Downlight designs are unique and can bring a calming atmosphere in any room. The interesting thing about this type of home Led lighting is that it highlights particular details, so it’s a popular way of lighting up the kitchen cabinets, the bathroom or the dressing table. The focus of attention can be easily changed by increasing or lowering the brightness of the downlights in different areas, thus creating a fun design using nothing but lights.

An interesting way to address lighting in your living room is with strips. Since today’s strips come in different colors, you can create a futuristic look in your living area or a fun, colorful nook in your children’s room. Since all strips are in fact small leds that don’t take as much space, you can place them over an art-print, behind the curtains or along one side of the ceiling of your room and create an illusion of a more spacious living area.

The post Unique Ways To Design With Light appeared first on Ways To.

Some places that have high ceilings of 30-40 meters, can be difficult to light up. So you need an efficient hi bay lighting solution that will maintain a convenient work environment. You want the lighting solution to offer better work quality and improve the productivity of your workers. Every business relies on cost efficiency and keeping the workers happy. Here are some tips and tricks to make sure you purchase the right lighting solution for your warehouse:

• You want the hi bay lights to meet all the challenges in your particular warehouse. This means purchasing the right product that best caters your working environment. Hi bay comes in many different voltages and wattages that will suit your specific requirements.
• Hi bay lighting has the option of dimmable generators, surge protectors, wire guards, tempered glass and acrylic lens. Again, make the choice based on what will suit best for your warehouse.
• Invest in a high quality product that will have a long life span. Changing lights on regular basis will not only take a toll on your budget, but it will also disrupt the work and productivity of your employees.
• Make sure you go for energy efficient high bay lights in order to cut down utility bills and take carbon footprint to a minimum.
• Make sure the high bay reflector is vibration and shock resistant. Ensure they offer high reflection and durability as well as constant lighting output.

High bay lighting is mostly effective if it suits your requirements precisely for a particular environment and offers just the right vision and glare quality. The heat might be a problem as it may lead to moisture on the products and it may damage them, so it’s important that the lighting solution has an installed heat dissipation system that will keep the warehouse cool. With the large offer on the market available nowadays, it should be an easy task to pick the right lighting system for your warehouse that will fulfill all your needs.

The post Surprising Ways Warehouses Can Benefit from Hi Bay Lighting appeared first on Ways To.